Liquid Filters
Options such as skid mounting with piping available.
Housing Material:
Carbon Steel, 304SS, 316SS, Monel, Nickel, Alloy 20, Hastelloy or practically any alloy.
|
| Media |
Max. Temp |
Services |
| Cotton |
300°F |
Oils, solvents, process water, acids, etc |
| Fiberglass |
750°F |
Acids, solvents, oils, etc. Used primarily for high temperature services |
| Nylon |
350°F |
Concentrated alkalis and hydrocarbons |
| Acrylic/Orlon |
300°F |
Recommended for strong acids |
| Polyester |
250°F |
Similar to cotton and polypropylene, higher temperature resistance than polypropylene |
| Polypropylene |
150°F |
Acids, process water, alkalis, and many other processes |
| Rayon |
300°F |
Oil and many other processes |
|
 |
| TYPE 61V |
|
| Core Material and maximum core temperature:
Polypropylene (120° F), Tinned Steel (400° F) and 304 or 316 Stainless Steel (750° F).
"O" Ring seals:
Buna-N is standard (250° F).Optional: Neoprene (275° F), Viton A (400° F) and other materials.
Standard cartridges:
2-1/2" diameter X 30" long. Other sizes for special applications.
|
Dimensional Chart (In Inches)
| Nozzles |
O.D. |
L |
Lb |
Ld |
Hs |
| 2" |
6 5/8"
|
48 |
30 |
5 |
10 |
| 2" |
8 5/8"
|
48 |
30 |
5 |
10 |
| 2" |
10 3/4"
|
50 |
32 |
6 |
11 |
| 3" |
12 3/4"
|
50 |
32 |
6 |
11 |
| 3" |
14" |
50 |
32 |
6 |
12 |
| 3" |
16" |
50 |
32 |
6 |
12 |
| 3" |
18" |
50 |
34 |
7 |
13 |
| 4" |
20" |
50 |
34 |
7 |
13 |
| 4" |
24" |
50 |
34 |
7 |
18 |
| 6" |
30" |
52 |
36 |
7 |
20 |
| 6" |
36" |
52 |
36 |
7 |
20 |
| 8" |
42" |
60 |
52 |
8 |
22 |
|
 |
| Economical wound cotton cartridge (shown above) with spring and seal assembly. |
|
| Information Required:
- Filter type number.
- Medium flowing and flow rate.
- Operating pressure and temperature.
- Specific gravity or molecular weight.
- Viscosity, if known.
- Particle size retention.
- Materials of construction.
- Design pressure and temperature.
- Code Stamp, if required.
Particle retention selection: 1/2, 1, 3, 5, 10, 15, 20, 30, and 50 micron size. Also, 0.3, 0.5, and 1 micron absolute.
| |
Model 601 All Metal High Temperature-High Pressure Filter Cartridges
"Cartridge to the right is being taken apart for cleaning." For Liquids, Steam, or Gas Particle retention: 10 to 75 micron size. Material: Steel, 304 or 316 stainless steel.
Model 601 is an all metal filter cartridge for
extremely high temperature or pressure without the outside perforated
cylinder as shown. Type 601-BF is the same cartridge except it has the
outside removable perforated cylinder for back flushing. Both cartridges
have pleated filtering screens for more surface area and both can be taken
apart for cleaning.
|
|
